STR9100>tftpboot 0x1000000 kernel.bin Check MAC/PHY 0 Link Status : UP! Check MAC/PHY 1 Link Status : DOWN! ARP broadcast 1 eth addr: 00:19:66:35:2b:79 TFTP from server 192.168.1.150 ; our IP address is 192.168.1.151 Filename 'kernel.bin'. Load address: 0x1000000 Loading: ###################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### done Bytes transferred = 2651380 (2874f4 hex) STR9100>go 0x1000000 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #203: Mon Sep 28 21:41:19 UTC 2009 yohanes@connor.lan:/usr/home/yohanes/work/src/sys/arm/compile/CNS11XXNAS Preloaded elf kernel "elf kernel" at 0xc129ec18. unknown CPU (ID = 0x66015261) WB enabled LABT 16KB/16B 2-way Instruction cache 16KB/16B 2-way write-back-locking-B Data cache real memory = 67108864 (64 MB) Physical memory chunk(s): 00000000 - 0xffffff, 16777216 bytes (4096 pages) 0x1303000 - 0x3e9efff, 45727744 bytes (11164 pages) avail memory = 61865984 (59 MB) ULE: setup cpu 0 null: random: nfslock: pseudo-device mem: econaarm0: on motherboard econa_alloc_resource start 00000000 end ffffffff, count = 00000008 econa_alloc_resource start 00000000 end ffffffff, count = 00000008 sys_res_memory �٬�+}�����}ɕͽ�ɍ��start 00000000 end ffffffff, count = 00000008 econa_alloc_resource start 00000000 end ffffffff, count = 00000008 sys_res_memory �uart0: mem 0x78000000-0x78ffffff irq 10 on econaarm0 econa_alloc_resource start 00000000 end ffffffff, count = 00000008 sys_res_memory econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq uart0: [FILTER] uart0: fast interrupt uart0: console (38461,n,8,1) timer0: mem 0x79000000-0x79ffffff irq 0,1 on econaarm0 econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_memory econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq System clock 00000051Reset conf 00038240STR9100 CPU Clock: 200 MHz IRQ Timer1 at int #0x0 clock 100000000(Hz) timer0: [FILTER] timer0: [FILTER] ohci0: mem 0xf0000000-0xf7ffffff irq 23 on econaarm0 econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_memory econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0 on ohci0 ehci probe ehci probe ehci0: mem 0xf8000000-0xffffffff irq 24 on econaarm0 econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_memory econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq ehci0: [MPSAFE] ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 ece0: mem 0xe0000000-0xe0ffffff irq 18,19,20,21,22 on econaarm0 econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_memory econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq econa_alloc_resource start 00000000 end ffffffff, count = 00000001 sys_res_irq phy0_id=0x243, phy1_id=ffff using IC_PLUS_PHY size of rx = 16 tx = 16 ece0: using rmii: 0 ece0: Generating random ethernet address. ece_attach ../../../arm/econa/if_ece.c:460 ece_attach ../../../arm/econa/if_ece.c:462 miibus0: on ece0 ukphy0: PHY 0 on miibus0 ukphy0: OUI 0x0090c3, model 0x0005, rev. 4 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ece_attach ../../../arm/econa/if_ece.c:469 ece_attach ../../../arm/econa/if_ece.c:485 ece_attach ../../../arm/econa/if_ece.c:498 ece0: bpf attached ece0: Ethernet address: 00:aa:bb:cc:dd:19 ece0: [MPSAFE] ece0: [ITHREAD] ece0: [MPSAFE] ece0: [ITHREAD] ece0: [MPSAFE] ece0: [ITHREAD] ece_attach ../../../arm/econa/if_ece.c:531 ece_attach ../../../arm/econa/if_ece.c:535 ece_attach ../../../arm/econa/if_ece.c:541 Timecounter "CPU Timer" frequency 50000000 Hz quality 1000 Timecounters tick every 10.000 msec lo0: bpf attached usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (probe0:umass-sim0:0:0:0): Retrying Command pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: Removable Direct Access SCSI-2 device pass0: Serial Number 001CC05FE932F921315D01AE pass0: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: Serial Number 001CC05FE932F921315D01AE da0: 40.000MB/s transfers da0: 1906MB (3903578 512 byte sectors: 255H 63S/T 242C) Trying to mount root from ufs:da0s1a WARNING: / was not properly dismounted warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init Enter full pathname of shell or RETURN for /bin/sh: # ifconfig ece0 192.168.1.151 init lockedece0: link state changed to UP # cd /root # ls .cshrc idwiki-latest-pages-articles.xml.bz2 .k5login iperf-2.0.4 .login iperf-2.0.4.tar.gz .profile usb_dos_bootdisk.img.bz2 .ssh # ftp 192.168.1.150 Connected to 192.168.1.150. 220 ProFTPD 1.3.2a Server (Debian) [::ffff:192.168.1.150] Name (192.168.1.150:root): yohanes 331 Password required for yohanes Password: 230 User yohanes logged in Remote system type is UNIX. Using binary mode to transfer files. ftp> put usb_dos_bootdisk.img.bz2 b2 local: usb_dos_bootdisk.img.bz2 remote: b2 229 Entering Extended Passive Mode (|||10409|) 150 Opening BINARY mode data connection for b2 100% |*************************************| 7404 KB 1.66 MB/s 00:00 ETA 226 Transfer complete 7582416 bytes sent in 00:04 (1.66 MB/s) ftp> put usb_dos_bootdisk.img.bz2 b2 local: usb_dos_bootdisk.img.bz2 remote: b2 229 Entering Extended Passive Mode (|||53752|) 150 Opening BINARY mode data connection for b2 100% |*************************************| 7404 KB 2.14 MB/s 00:00 ETA 226 Transfer complete 7582416 bytes sent in 00:03 (2.14 MB/s) ftp>